Contact |
|
Tel：
|
0577-61719111
|
|
|
0577-61719112
|
|
|
0577-61719113
|
|
Fax：
|
0577-61719188
|
|
E-mail：
|
chinanstar@foxmail.com
|
|
Web：
|
www.e-9188.com
|
|
Zip：
|
325604
|
|
Add：
|
Zhang Qu 3,Xinguang Industrial Zone,Liushi Town,
Yueqing City,Zhejiang Province
|
|
|
|
Company News |
Congratulations to Polaris electronic research and development of a micro-arc cold welding (laser imitation) |
| News source:Yueqingshi North Starelectron Co.,Ltd Time:2013-4-23 Views:62 |
E-9188G-type arc welding machine works:
The machine can be stored in the capacitor energy in an instant by pulsed arc in the form of release in the tungsten electrode and the workpiece between the high temperature arc of the metal material of the workpiece and the wire rapid melting and welding, welding purpose .
This welding method is characterized by: a very short time, very little heat. This welding machine can be completed within a few tens of milliseconds wire and workpiece welding process, as opposed to ordinary welder (more than a few seconds), transmitted to the workpiece much less heat. Workpiece matrix, less heat, solder materials other than temperature rise is small, does not produce the annealing discoloration. Since the pool volume is less than 2mm3 each weld pulse is generated, the stress formed is also smaller. A welding requires a lot of molten pool combined, but because of the direction of the stress of the solder joints dispersed workpiece are less concentrated stress after welding deformation of the workpiece is small.
The output pulse energy of the machine is very concentrated, therefore, difficult to handle ordinary welding copper and aluminum can also welding.
E-9188G-type metal repair welding machine developed by our company, it has the following advantages:
1 high weld strength: the full metallurgical weld repairs at the milling, filing and other post-processing.
2 Patch accuracy: round wire fill material to be repaired, do not lose the original datum, less the excess solder, easy post-surgery.
The minimum amount of repair 0.3mm fill material (0.3mm in diameter).
Repair fast: the fastest repair up to 100mm3/min.
4 Substrate injury: hot spots, will not cause deformation of the substrate annealing.
Power distribution is reasonable: the use of microcomputer chip control, a variety of different diameters materials can get the best power.
6. Voltage range: switching power supply, when the voltage change to fluctuate within a range of ± 20%, the machine still guaranteed to work, and to maintain a stable output power.
Electrically connected: with quick coupling connector can be easily connected to the installation.
Easy to carry: small size machine (370 × 150 × 200) mm, light weight, 10kg
Performance indicators:
Welding material: In addition to the low melting point materials such as zinc, tin and carbide workpiece made of all kinds of metal materials (including copper and aluminum) can be repaired.
Welding items: 1. Equipment and tooling in the course of local wear.
2 during manufacture defects, such as trachoma stomatal size tolerance, edges and corners of damage, lack of argon welding.
Cavity rust spots and dents.
Power supply: single-phase 220V ± 20% 50Hz
Power consumption :10-1000W
Instantaneous maximum power: more than 40KW
Power modes: Mode 1 to Mode 5. Output current adjustable from 1 to 99; the output pulse adjustable from 1 to 99.
Continuous output pulse frequency: five-speed adjustable (1Hz; 2 Hz; 3 Hz; 5Hz; 10Hz)
The host volume: (370 × 150 × 200) mm
Host weight: 10Kg
|
|
|
中文
English